Influences of aging on thermal decomposition mechanism of high performance oxidizer ammonium dinitramide

Ammonium dinitramide (ADN) is one of the several promising new solid propellant oxidizers. ADN is of interest because its oxygen balance and energy content are high, and it also halogen-free. One of the most important characteristics of a propellant oxidizer, however, is stability and ADN is known to degrade to ammonium nitrate (AN) during storage, which will affect its performance. This study focused on the effects of aging on the thermal decomposition mechanism of ADN. The thermal behaviors of ADN and ADN/AN mixtures were studied, as were the gases evolved during their decomposition, using differential scanning calorimetry (DSC), thermogravimetry–differential thermal analysis-infrared spectrometry (TG–DTA-IR), and thermogravimetry–differential thermal analysis-mass spectrometry (TG–DTA-MS). The results of these analyses demonstrated that the decomposition of ADN occurs via a series of distinct stages in the condensed phase. The gases evolved from ADN decomposition were N₂O, NO₂, N₂, and H₂O. In contrast, ADN mixed with AN (to simulate aging) did not exhibit the same initial reaction. We conclude that aging inhibits early stage, low temperature decomposition reactions of ADN. Two possible reasons were proposed, these being either a decrease in the acidity of the material due to the presence of AN, or inhibition of the acidic dissociation of dinitramic acid by NO ₃ ^? .     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Photoswitchable organocatalysis in acylation of alcohol using dithienylethene-linked azoles

Three novel dithienylethenes bearing azole derivatives were synthesized and found to undergo reversible photocyclization of the dithienylethene units upon alternate irradiation with UV and visible light. Among them, the dithienylethene-linked imidazole and N-phenylimidazole exhibited a relatively high organocatalytic activity for the acylation of 2-decanol with acetic anhydride, and the catalytic activity of the dithienylethene-linked imidazole could be switched by reversible photoinduced cyclization/cycloreversion of the dithienylethene unit.     

Synthetic study of kosinostatin aglycone: synthesis of BCDE rings using alkoxycarbonylmethylation of diazonaphthoquinone

A synthetic study of kosinostatin aglycone is reported. Synthesis of key intermediate lactone 3, which corresponds to the BCDE ring fragment, was accomplished, and the precursor BCD ring fragment 5 was synthesized via two routes. First, 5 was synthesized from 2,5-dimethoxybenzaldehyde 16 by the combination of typical known transformations including efficient application of non-aqueous OsO₄ oxidation in the presence of PhB(OH)₂. However the synthesis required 15 long steps, and its main difficulty was ortho-alkoxycarbonylmethylation of 1-naphthol. Next we attempted to apply our recently developed alkoxycarbonylmethylation of diazonaphthoquinone for the synthesis of 5, and 5 was successfully synthesized in 9 steps from the same starting compound 16. Finally, 5 was stereoselectively converted to lactone 3 via trifluoroacetic acid-mediated cyclization of the 3,4-epoxycylohexanecarboxylic acid derivative.     

Synthesis of 3′-allylindoline spirobenzopyrans derived from 3-allyl-3H-indoles

In this study, 8 new spirobenzopyrans were synthesized. A novel, three-step, facile route for the synthesis of 3′-allylindoline spirobenzopyrans via 3-allyl-3H-indoles was developed. The newly synthesized spirobenzopyrans were evaluated for their photochromic properties. The presence of an allyl moiety at the 3′ position did not disturb the photochromic response. The steric effects of the diallyl groups at the 3′ position affected the interconversion between colored and colorless forms. Therefore, the allyl chain in 3′-allylindoline spirobenzopyrans can be utilized to attach these compounds to a molecular matrix. Consequently, this synthetic methodology could be readily applied to the creation of new photo-switchable materials.     

Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

Dibenzo[a,f]perylene Bisimide: Effects of Introducing Two Fused Rings

Perylene bisimides (PBIs) are fascinating dyes with various potential applications. To study the effects of introducing a dibenzo‐fused structure to the perylene moiety, π‐extended PBI derivatives with a dibenzo‐fused structure at both of the a and f bonds were synthesized. The twisted structure was characterized by X‐ray crystal structure analysis. In the cyclic voltammograms, the dibenzo[a,f]‐fused PBI showed a reversible oxidation wave at much less positive potential, relative to a dibenzo[a,o]‐fused PBI derivative. These data indicated that two ring fusions at both sides of a naphthalene moiety, which construct a tetracene core, effectively raise the HOMO level compared to fusion of one ring at each naphthalene moiety (two anthracene cores). The dibenzo[a,f]‐fused PBI derivative showed an absorption band at 735 nm with a shoulder band reaching 900 nm.     

Characterization of Functional Groups in Estuarine Dissolved Organic Matter by DNP-enhanced 15N and 13C Solid-State NMR

Estuaries are key ecosystems with unique biodiversity and are of high economic importance. Along the estuaries, variations in environmental parameters, such as salinity and light penetration, can modify the characteristics of dissolved organic matter (DOM). Nevertheless, there is still limited information about the atomic-level transformations of DOM in this ecosystem. Solid-state NMR spectroscopy provides unique insights into the nature of functional groups in DOM. A major limitation of this technique is its lack of sensivity, which results in experimental time of tens of hours for the acquisition of ¹³C NMR spectra and generally precludes the observation of ¹⁵N nuclei for DOM. We show here how the sensitivity of solid-state NMR experiments on DOM of Seine estuary can be enhanced using dynamic nuclear polarization (DNP) under magic-angle spinning. This technique allows the acquisition of ¹³C NMR spectra of these samples in few minutes, instead of hours for conventional solid-state NMR. Both conventional and DNP-enhanced ¹³C NMR spectra indicate that the ¹³C local environments in DOM are not strongly modified along the Seine estuary. Furthermore, the sensitivity gain provided by the DNP allows the detection of ¹⁵N NMR signal of DOM, in spite of the low nitrogen content. These spectra reveal that the majority of nitrogen is in the amide form in these DOM samples and show an increased disorder around these amide groups near the mouth of the Seine.     

Quantification of Intracellular Thiols by HPLC-Fluorescence Detection

Biothiols, such as cysteine and glutathione, play important roles in various intracellular reactions represented by the redox equilibrium against oxidative stress. In this study, a method for intracellular thiol quantification using HPLC-fluorescence detection was developed. Thiols were derivatized with a thiol-specific fluorescence derivatization reagent, viz. ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate (SBD-F), followed by reversed-phase separation on an InertSustain AQ-C18 column. Six different SBD-thiols (homocysteine, cysteine, cysteinylglycine, γ-glutamylcysteine, glutathione, and N-acetylcysteine as an internal standard) were separated within 30 min using a citric buffer (pH 3.0)/MeOH mobile phase. The calibration curves of all the SBD-thiols had strong linearity (R² > 0.999). Using this developed method, the thiol concentrations of human chronic myelogenous leukemia K562 cell samples were found to be 5.5–153 pmol/1 × 10⁶ cells. The time-dependent effect of a thiol scavenger, viz. N-ethyl maleimide, on intracellular thiol concentrations was also quantified. This method is useful for elucidating the role of intracellular sulfur metabolism.     

Thermodynamic study on the interaction of imidazolium salts and POE-type nonionic surfactant in the adsorbed film

The composition of the adsorbed film and the excess Gibbs energy of adsorption $ {\widehat{g}}^{\mathrm{H},\mathrm{E}} $ were evaluated from thermodynamic analysis of surface tensions for the 1-decyl-3-methylimidazoulium bromide (C₁₀mimBr)–tetraethylene glycol monooctyl ether (C₈E₄) and 1-decyl-3-methyl-imidazolium tetrafluorobrorate (C₁₀mimBF₄)–C₈E₄ systems, where the counter anion of imidazolium salts is different from each other. The higher miscibility of two components compared to an ideal mixing and thus negative $ {\widehat{g}}^{\mathrm{H},\mathrm{E}} $ were observed in the former, which comes from the ion–dipole interaction between imidazolium cation and the oxyethylene group of C₈E₄. On the other hand, the lower miscibility and thus positive $ {\widehat{g}}^{\mathrm{H},\mathrm{E}} $ were observed for the latter. Such differences were attributed to that BF₄ ^? forms two hydrogen bonds and has stronger affinity with the cationic head group of C₁₀mim⁺ than Br^?. This results in that the ion–dipole interaction between C₈E₄ and C₁₀mim⁺ cation is diminished in the C₁₀mimBF₄–C₈E₄ system.